Viewing Ethernet Port Information

You can view status information of the device's Ethernet ports. To configure Ethernet ports, see Configuring Underlying Ethernet Devices.

➢

To view Ethernet port information:

■

Open the Ethernet Port Information table, by doing one of the following:

●

Navigation tree: Monitor menu > Monitor tab > Network Status folder > Ethernet Port Information.

●

Monitor home page: Click an Ethernet port on the graphical display of the device (see Viewing Device Status on Monitor Page).

Ethernet Port Information Table Description

Parameter	Description
Port Name	Displays the user-defined name of the port.
Active	Displays if the port is active ("Yes") or not ("No").
Speed	Displays the speed of the Ethernet port.
Duplex Mode	Displays if the port is half- or full-duplex mode.
State	Displays the status of the port.
Group Member	Displays the Ethernet Group to which the port belongs.